Asymmetric Profile Carbon Fiber 29er wheelset.
- 29" with 41mm outer width
- Lower Profile Nets a 30% Increase in Impact Strength
- Less Material Saves 7.5% Weight
- Industry Nine Hubs Machined in USA
- Boost Front 110mm and Rear 148mm Hub or Standard spacing available.
- SRAM XD or Shimano Drivers
- The hubs use Centerlock style brake rotors or adapters for 6-bolt (not included)
- Wheels Built in USA
- Both wheels are pre-taped with valve stems for hassle free tubeless installation.
With the 942, we’ve retained the 41mm outer/35mm inner widths of our 941 rim, while increasing impact strength, reducing weight and maintaining all-important lateral stiffness.
This carbon rim design features a lower cross section height for increased impact performance. The lower 19.5mm section height makes the wheel better able to distribute the loads of localized impacts from rock strikes or hard landings. Also, we are introducing a new hybrid carbon fiber layup, strategically combining layers of a new, high-toughness carbon/epoxy prepreg with our original carbon composite, increasing both ultimate strength and impact durability. This, combined with the asymmetric rim design that features 5mm of offset (2.5mm on 935) allows for higher spoke tensions that are nearly equal from one side of the wheel to the other. As a result of all this, the 942 nets a 30% increase in impact strength yet a 7.5% decrease in weight, compared to our previous rims.
The 942 rims are ideal for the ultra low pressures (10-18 psi) that we like to run with 2.8 Plus tires (or 18-25psi for 2.25" - 2.5" tires). Running any of our 35mm internal width rims work incredibly well with the new 2.8 Plus rubber we've been riding from Schwalbe and Maxxis. The low system weight of the wheels with these rims and tires combined with the monstrous traction advantage have been a revelation for those who have ridden them. We've also had great luck with the 3.0 tires on the rims, and our tire manufacturing friends have informed us that there are a lot of new Plus tires in the pipeline.
These carbon wheels include the excellent Industry Nine Torch hubs. The durable hubs are made in the USA in Industry Nine's Asheville machine shop, and feature a 60t ratchet with 6 out of phase pawls that results in a 3º engagement. They are equipped with Enduro bearings and come with either Shimano or SRAM XD drivers.